CuAl8Fe3 — C61400
CuAl8Fe3 – UNS.C61400 Aluminum Bronze Alloys, Nominally composed of 90-91% copper and 8% aluminum as well as 3% Iron, the typical application are vary from the fastener and industrial and marine area.
CuAl8Fe3 — C61400
CuAl8Fe3 – UNS.C61400 Aluminum Bronze Alloys, Nominally composed of 90-91% copper and 8% aluminum as well as 3% Iron, the typical application are vary from the fastener and industrial and marine area.
Where C61400 Is Used
Typical end uses published by Vital for this grade.
Fasteners
Threaded Members, Stringers, Bolts, Nuts
Industrial
Piping Systems, Structural Components, Machine Parts, Corrosion Resistant Vessels, Sea Water Piping, Condenser Tube and Piping Systems, Tube Sheets, Welded Pipe, Seamless Tubing and Pipe, Chutes for Abrasive Grains, Heat Exchanger Tubes, Mining Shovels, Tanks, Condenser Head Plates
Marine
Fasteners, Protective Sheathing, Pressure Vessels, Marine Hardware, Welded Tanks
Ordnance
Blending Chambers, Mixing Troughs
Specifications And Material Data
| Al | 6.00-8.00% |
|---|---|
| Fe | 1.50-3.00% |
| Mn | 1.00% Max. |
| Zn | 0.20% Max. |
| P | 0.015% Max. |
| Pb | 0.01% Max. |
| Cu | Balance |
Copper plus additions equal 99.50% minimum.
| Specific Gravity | 7.90 g/cm3 |
|---|---|
| Coefficient of Thermal Expansion per °C | 16.20 x 10-6 (20-300°C) |
| Electrical Conductivity (% IACS) | 14 % @ 68 F |
| Thermal Conductivity | 39.0 Btu · ft/(hr · ft2·oF)at 68F |
| Modulus of Elasticity in tension | 17000 ksi |
1). the units are based upon US Customary. 2). the typical physical properties apply to age hardened products.
Sizes And Product Forms
Available Sizes
Custom Diameter & Sizes, Random Mill lengths
Available Products And Forms
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars
Custom shapes are available upon request.
International Specification
| Rods/Bars | UNS.C61400, CDA614, ASTM B169, B150 |
|---|---|
| European Standards | CuAl8Fe3, DIN.2.0932, CW303G to EN, CA106 |
Unless otherwise specified, material will be produced to DIN & RWMA.
Abbreviations
- ASTM — American Society for Testing and Materials
- RWMA — Resistance Welder Manufacturers' Association
Tempers And Mechanical Data
The detailed Mechanical Properties will be available on request from customers.
Frequently Asked Questions
Answers drawn from the Vital technical data for this page.
What is the chemical composition of C61400?
C61400 is supplied to the following nominal composition:
- Al: 6.00-8.00%
- Fe: 1.50-3.00%
- Mn: 1.00% Max.
- Zn: 0.20% Max.
- P: 0.015% Max.
- Pb: 0.01% Max.
- Cu: Balance
What are the typical physical properties of C61400?
Typical values published by Vital for C61400:
- Specific Gravity: 7.90 g/cm3
- Coefficient of Thermal Expansion per °C: 16.20 x 10-6 (20-300°C)
- Electrical Conductivity (% IACS): 14 % @ 68 F
- Thermal Conductivity: 39.0 Btu · ft/(hr · ft2·oF)at 68F
- Modulus of Elasticity in tension: 17000 ksi
Which international specifications does C61400 meet?
- Rods/Bars: UNS.C61400, CDA614, ASTM B169, B150
- European Standards: CuAl8Fe3, DIN.2.0932, CW303G to EN, CA106
Can you supply mechanical property data for C61400?
The detailed Mechanical Properties will be available on request from customers.
Which product forms and sizes are available?
Custom Diameter & Sizes, Random Mill lengths Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars Custom shapes are available upon request.
How do I request a quotation?
Email the grade, temper, dimensions and quantity to [email protected]. Unless otherwise specified, material is produced to ASTM.
Quote C61400 To Your Specification
Send grade, temper, dimensions and quantity. Custom shapes are available on request.